Registering a Grandstream DP 720 Handset and DP 750 Base Station

Updated at August 29th, 2024

Prerequisites

  • DP720 handset
  • DP750 Base station
 

Register Handset with the Base Station

  1. On the DP750 Base station, press and hold the Radio/Page button for about 7 seconds until the radio LED starts blinking; or, access web UI > Status > DECT Status and press the Subscribe button.
  2. On DP720, Press “Menu” 
  3. Use arrow keys to reach > Settings > Registration.
  4. Navigate to Register, then press “Select” while the DP750 Radio icon blinks.
  5. Select the corresponding base, and then press “Subscribe”.
  6. DP720 handset will display Easy Pairing on the LCD and play an audible buzz when subscribed.

Checking Base Station IP address

  1. Press “Menu”.
  2. Use arrow keys to reach > Settings > Info.
  3. Press the “Select” softkey to display the Info page. Browse the screen to find the IP address, subnet mask, and default gateway information for your DP750.

Changing the Base PIN

  1. Press “Menu” 
  2. Use arrow keys to reach > Settings > System Settings. 
  3. Enter the current base PIN code (Default is 0000).
  4. Enter the desired base code PIN.
  5. Press the “Save” softkey to confirm.

Was this article helpful?

Print to PDF